These adapters allow you to install a 1988 fiero engine cradle Into to a 1984-1987 fiero. They position the strut into the correct position to maintain suspension geometry. You will need to cut a new hole in the strut tower for the strut end to stick through. The adapter uses the existing three mounting holes.
You get one left and one right strut plate, polyurethane strut mounts and spring perch along with the required washers and nuts. Buyer will also need to provide the cradle, struts with the factory spring perch cut off, 2.5" ID coil over sleeve and nut and the springs of your choosing. 12" long 2.5" inside diameter 325 lbs. springs work good for a 3800 swap.
